Show another permutation which also doesn't work correctly >_<
[rpi-open-firmware.git] / romstage.c
1 /*=============================================================================
2 Copyright (C) 2016 Kristina Brooks
3 All rights reserved.
4
5 This program is free software; you can redistribute it and/or
6 modify it under the terms of the GNU General Public License
7 as published by the Free Software Foundation; either version 2
8 of the License, or (at your option) any later version.
9
10 This program is distributed in the hope that it will be useful,
11 but WITHOUT ANY WARRANTY; without even the implied warranty of
12 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 GNU General Public License for more details.
14
15 FILE DESCRIPTION
16 VideoCoreIV first stage bootloader.
17
18 =============================================================================*/
19
20 #include <common.h>
21 #include <hardware.h>
22
23 uint32_t g_CPUID;
24
25 #define UART_DR (UART_BASE+0x00)
26 #define UART_RSRECR (UART_BASE+0x04)
27 #define UART_FR (UART_BASE+0x18)
28 #define UART_ILPR (UART_BASE+0x20)
29 #define UART_IBRD (UART_BASE+0x24)
30 #define UART_FBRD (UART_BASE+0x28)
31 #define UART_LCRH (UART_BASE+0x2C)
32 #define UART_CR (UART_BASE+0x30)
33 #define UART_IFLS (UART_BASE+0x34)
34 #define UART_IMSC (UART_BASE+0x38)
35 #define UART_RIS (UART_BASE+0x3C)
36 #define UART_MIS (UART_BASE+0x40)
37 #define UART_ICR (UART_BASE+0x44)
38 #define UART_DMACR (UART_BASE+0x48)
39 #define UART_ITCR (UART_BASE+0x80)
40 #define UART_ITIP (UART_BASE+0x84)
41 #define UART_ITOP (UART_BASE+0x88)
42 #define UART_TDR (UART_BASE+0x8C)
43
44 void uart_putc(unsigned int ch)
45 {
46 while(UART_MSR & 0x20) break;
47 UART_RBRTHRDLL = ch;
48 }
49
50 void uart_init(void) {
51 unsigned int ra = GP_FSEL1;
52 ra &= ~(7 << 12);
53 ra |= 4 << 12;
54 GP_FSEL1 = ra;
55
56 CM_UARTCTL = CM_PASSWORD | CM_SRC_OSC | CM_UARTCTL_FRAC_SET;
57 udelay(150);
58 CM_UARTDIV = CM_PASSWORD | 0x6666;
59 udelay(150);
60 CM_UARTCTL |= CM_UARTCTL_ENAB_SET;
61 udelay(150);
62
63 mmio_write32(UART_CR, 0);
64
65 GP_PUD = 0;
66 udelay(150);
67 GP_PUDCLK0 = (1 << 14) | (1 << 15);
68 udelay(150);
69 GP_PUDCLK0 = 0;
70
71 mmio_write32(UART_IBRD, 1);
72 mmio_write32(UART_FBRD, 40);
73 mmio_write32(UART_ICR, 0x7FF);
74 mmio_write32(UART_LCRH, 0x70);
75 mmio_write32(UART_CR, 0x301);
76 }
77
78 void led_init(void) {
79 unsigned int ra;
80
81 ra = GP_FSEL1;
82 ra &= ~(7 << 18);
83 ra |= 1 << 18;
84
85 GP_FSEL1 = ra;
86 }
87
88 /*
89 #define CM_PLLC_DIGRST_BITS 9:9
90 #define CM_PLLC_DIGRST_SET 0x00000200
91 #define CM_PLLC_ANARST_BITS 8:8
92 #define CM_PLLC_ANARST_SET 0x00000100
93 #define CM_PLLC_HOLDPER_BITS 7:7
94 #define CM_PLLC_HOLDPER_SET 0x00000080
95 #define CM_PLLC_LOADPER_BITS 6:6
96 #define CM_PLLC_LOADPER_SET 0x00000040
97 #define CM_PLLC_HOLDCORE2_BITS 5:5
98 #define CM_PLLC_HOLDCORE2_SET 0x00000020
99 #define CM_PLLC_LOADCORE2_BITS 4:4
100 #define CM_PLLC_LOADCORE2_SET 0x00000010
101 #define CM_PLLC_HOLDCORE1_BITS 3:3
102 #define CM_PLLC_HOLDCORE1_SET 0x00000008
103 #define CM_PLLC_LOADCORE1_BITS 2:2
104 #define CM_PLLC_LOADCORE1_SET 0x00000004
105 #define CM_PLLC_HOLDCORE0_BITS 1:1
106 #define CM_PLLC_HOLDCORE0_SET 0x00000002
107 #define CM_PLLC_LOADCORE0_BITS 0:0
108 #define CM_PLLC_LOADCORE0_SET 0x00000001
109 */
110
111 void switch_vpu_to_pllc() {
112 A2W_XOSC_CTRL |= A2W_PASSWORD | A2W_XOSC_CTRL_PLLCEN_SET;
113
114 A2W_PLLC_FRAC = A2W_PASSWORD | 87380;
115 A2W_PLLC_CTRL = A2W_PASSWORD | 52 | 0x1000;
116
117 A2W_PLLC_ANA3 = A2W_PASSWORD | 0x100;
118 A2W_PLLC_ANA2 = A2W_PASSWORD | 0x0;
119 A2W_PLLC_ANA1 = A2W_PASSWORD | 0x144000;
120 A2W_PLLC_ANA0 = A2W_PASSWORD | 0x0;
121
122 CM_PLLC = CM_PASSWORD | CM_PLLC_DIGRST_SET;
123
124 /* hold all */
125 CM_PLLC = CM_PASSWORD | CM_PLLC_DIGRST_SET |
126 CM_PLLC_HOLDPER_SET | CM_PLLC_HOLDCORE2_SET |
127 CM_PLLC_HOLDCORE1_SET | CM_PLLC_HOLDCORE0_SET;
128
129 A2W_PLLC_DIG3 = A2W_PASSWORD | 0x0;
130 A2W_PLLC_DIG2 = A2W_PASSWORD | 0x400000;
131 A2W_PLLC_DIG1 = A2W_PASSWORD | 0x5;
132 A2W_PLLC_DIG0 = A2W_PASSWORD | 52 | 0x555000;
133
134 A2W_PLLC_CTRL = A2W_PASSWORD | 52 | 0x1000 | A2W_PLLC_CTRL_PRSTN_SET;
135
136 A2W_PLLC_DIG3 = A2W_PASSWORD | 0x42;
137 A2W_PLLC_DIG2 = A2W_PASSWORD | 0x500401;
138 A2W_PLLC_DIG1 = A2W_PASSWORD | 0x4005;
139 A2W_PLLC_DIG0 = A2W_PASSWORD | 52 | 0x555000;
140
141 A2W_PLLC_CORE0 = A2W_PASSWORD | 2;
142
143 CM_PLLC = CM_PASSWORD | CM_PLLC_DIGRST_SET |
144 CM_PLLC_HOLDPER_SET | CM_PLLC_HOLDCORE2_SET |
145 CM_PLLC_HOLDCORE1_SET | CM_PLLC_HOLDCORE0_SET | CM_PLLC_LOADCORE0_SET;
146
147 CM_PLLC = CM_PASSWORD | CM_PLLC_DIGRST_SET |
148 CM_PLLC_HOLDPER_SET | CM_PLLC_HOLDCORE2_SET |
149 CM_PLLC_HOLDCORE1_SET | CM_PLLC_HOLDCORE0_SET;
150
151 CM_PLLC = CM_PASSWORD | CM_PLLC_DIGRST_SET |
152 CM_PLLC_HOLDPER_SET | CM_PLLC_HOLDCORE2_SET |
153 CM_PLLC_HOLDCORE1_SET;
154
155 CM_VPUCTL = CM_PASSWORD | CM_VPUCTL_FRAC_SET | CM_SRC_OSC | CM_VPUCTL_GATE_SET;
156 CM_VPUDIV = CM_PASSWORD | (4 << 12);
157 CM_VPUCTL = CM_PASSWORD | CM_SRC_PLLC_CORE0 | CM_VPUCTL_GATE_SET;
158 CM_VPUCTL = CM_PASSWORD | CM_SRC_PLLC_CORE0 | CM_VPUCTL_GATE_SET | 0x10; /* ENAB */
159
160 CM_TIMERDIV = CM_PASSWORD | (19 << 12) | 819;
161 CM_TIMERCTL = CM_PASSWORD | CM_SRC_OSC | 0x10;
162 }
163
164 extern void sdram_init();
165 extern void arm_init();
166 extern void monitor_start();
167
168 void print_crap() {
169 printf("TB_BOOT_OPT = 0x%X\n", TB_BOOT_OPT);
170 }
171
172 int _main(unsigned int cpuid, unsigned int load_address) {
173 switch_vpu_to_pllc();
174
175 led_init();
176 uart_init();
177
178 for(;;) {
179 printf(
180 "=========================================================\n"
181 "::\n"
182 ":: kFW for bcm2708, Copyright 2016, Kristina Brooks. \n"
183 "::\n"
184 ":: BUILDATE : %s %s \n"
185 ":: BUILDSTYLE: %s \n"
186 "::\n"
187 "=========================================================\n",
188 __DATE__, __TIME__,
189 "OPENSOURCE"
190 );
191
192 printf("CPUID = 0x%X\n", cpuid);
193 printf("LoadAddr = 0x%X\n", load_address);
194
195 print_crap();
196 }
197
198 g_CPUID = cpuid;
199
200 /* bring up SDRAM */
201 sdram_init();
202 printf("SDRAM initialization completed successfully!\n");
203
204 /* bring up ARM */
205 arm_init();
206
207 /* start vpu monitor */
208 monitor_start();
209
210 panic("main exiting!");
211 }
212
This page took 0.089604 seconds and 5 git commands to generate.